Have a query about how to fix a sagging recliner footrest? Then you are in the right place because I’m going to describe its complete procedure adequately so, please stick to the end.
As mentioned many times, a recliner is a comfortable piece of furniture, which is why it’s used a lot. After using it for a long time gives you frustration instead of comfort because of some common problems.
One of the most common problems which people have after using it for a long time is sagging recliner footrest. Sagging in the footrest means that the footrest won’t stay up in its position and won’t stay up. Most people don’t know that you can fix it, and they throw it away and buy a new one.
Instead of buying a new recliner, you can fix the old recliner sagging footrest, which is not that hard. Below is a valuable guide that helps you fix your sagging recliner footrest.
Usually, a recliner that won’t stay up in its place has sagging issues, which means that its footrest doesn’t stay in its place. The reason this issue is happening is its spring and its bar, and in the process of fixing it, you either repair it or replace it.
A recliner sagging issue is not hard to fix but consumes your time. The fixing process is given down below, so let’s get to it.
A recliner footrest becomes sagging after long use and doesn’t provide you the necessary support and comfort that you need. At the beginning of sagging the recliner footrest effects, it slowly affects the whole recliner and eventually stops working. So, it’s best to fix the recliner footrest before it leads the recliner to that stage.
The fix is not that hard, and all you need is some materials and tools like a screwdriver and a couple of screws. So, let’s begin the fixing.
• First, you need to prepare your recliner for repair, which means that you need to flip the recliner upside down or flip it on its sides, making it easy to access the bottom. The whole mechanisms and system of the recliner are at the bottom of the recliner.
• Before putting it on its side, make sure to put it in some sort of cloth or something else to prevent its headrest and armrest from getting dirty.
• After leaving the recliner on the side, it is time to access the bottom and bottom access and find a ratchet. It’s one of the parts of the mechanism which locks the footrest in its place.
• After accessing the ratchet, it’s time to remove it by unscrewing the screws and removing the spring. And remember to place the screws and springs safe because you will need them later to put them back.
• Now it’s time to remove the ratchet; you will find a bar that is the main reason for the sagging recliner.
• Now, you have to remove and fix the bar or simply replace it with a new one.
• After fixing it, you will have to put those screws and spring back in their position.
• Now check the screw if it loses, then tighten them with a wrench and look if it restores the previous firmness of the footrest.
• If you tried to tighten the screws but didn’t hold them up, you have to replace them with new screws. You also need to get long screws that hold the frame tighter than old screws.
Sometimes a recliner footrest gives too little or too much resistance whenever tilting your back on a recliner. This tension can be removed from your recliner just needing a slight adjustment.
- First, you need to remove the other furniture around the recliner to access the lever.
- Now access the button or lever of the recliner. The button is generally located on the recliner’s armrest, and the lever is located on the right side of the recliner.
- Set in your recliner chair and access the recliner lever. Now lean back and put pressure on your backrest while pulling the lever.
- Stop this process until you are satisfied with the recline of your recliner and stop the lever.
- It’s also the same as for the power recliner; just press the power button and recline it, and you can stop it until you reach your suitable position.
- Now sit in the recliner and put pressure on the footrest while leaning forward and also lift the lever or you can just release the button and let the recliner come to its original position.
- You have now located the thumbwheels, also known as wing nuts, on the bottom of your wheelchair. They usually are in the center of the base or near the back.
- Not just turn that wheel or nuts clockwise to increase the tension. Suppose you want to reduce the pressure anti-clockwise.
A recliner is the most usable type of furniture used in many styles and fashions. In most of these uses, it also accuses problems and issues. The sagging footrest is also one of the problems which can be solved if you follow a simple procedure.
I hope I have provided you with enough detail about how to fix a sagging recliner footrest? If you have any questions, then let me know. In the end, I just want to say that please keep your environment clean for your future.